Chapter 3.Web Configuration; Accessing The Router - Planet ADE-3400 User Manual

This chapter describes how to configure the device by using the Web-based configuration utility.

3.1 Accessing the Router

The following describes how to access the device for the first time in details.
Step 1 Open the Internet Explorer (IE) browser and enter http://192.168.1.1 in the address bar.
Step 2 In the Login page that is displayed, enter the username and password, and then click OK.
The username and password of the super user are admin and admin.
After logging in, the page shown in the following figure appears. You can check, configure and modify all the settings.
On the Web configuration page, you can click Apply Changes to
save the settings temporarily. If you want to save the settings of this
page permanently, clicks save of Attention that appears at the
bottom of the Web page after the configuration.

Chapter 3.Web Configuration

12
ADSL2/2+ Router
ADE-3400