General Safety Warnings; Maintenance - Qualcast 1718638 Operating Instructions Manual

GENERAL SAFETY
WARNINGS
WARNING! When using the
machine the safety rules must
be followed. For your own safety
and bystanders please read these
instructions before operating the
machine. Please keep the instructions
safe for later use.
SAVE THESE INSTRUCTIONS
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
If the supply cord is damaged, it must
be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid a hazard.
SAFETY WARNINGS FOR
LAWN TRIMMER
a) Wear protective glasses or goggles;
b) Never allow children or people
unfamiliar with the instructions to use
the machine;
c) Stop using the machine while people,
especially children, or pets are
nearby;
d) Only use the machine in daylight or
good artificial light;
e) Before using the machine and after
any impact, check for signs of wear
or damage and repair as necessary;
f) Never operate the machine with
damaged guards or without the
guards in place;
g) Keep hands and feet away from
the cutting means at all times and
especially
250W
Electric Grass Trimmer
ORIGINAL INSTRUCTIONS
h) Take care against injury from any
i) Never fit metal cutting elements;
j) Never use replacement parts
k) Disconnect the machine from the
I) Always ensure that ventilation

MAINTENANCE

a) After use, disconnect the machine
b) When not in use store the machine
c) Mains powered trimmers should
d) Use only manufacturers
- Read the instructions carefully,
- Be familiar with the controls and
- Before use check the supply and
- If the cord becomes damaged
- Do not use the lawn trimmer (edge
the motor is switched off,
- Keep extension cords away from
when switching on the motor;
device fitted for trimming the filament
line length. After extending new
cutter line always return the machine
to its normal operating position
before switching on;
or accessories not provided or
recommended by the manufacturer;
mains before checking, cleaning or
working on the machine and when it
is not in use;
openings are kept clear of debris;
from the mains and check for
damage;
out of the reach of children;
only be repaired by an authorised
repairer;
recommended replacement parts
and accessories.
proper use of the equipment;
extension cord for signs of damage or
ageing,
during use, disconnect the cord
from the supply immediately. DO
NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY,
trimmer), if the cords are damaged
or worn,
WARNINGS:Warning. Cutting
elements continue to rotate after
HELPLINE NO 03448010979