Icom IC-M25 Instruction Manual page 28

7
SET MODE
D Automatic backlighting
This function is convenient for the operation in the night. The
backlight can be selected from ON and OFF.
[PTT] is pushed.
tivity.
D LCD contrast setting
Set the LCD contrast level to High contrast or Low contrast.
The LCD contrast level has little effect during indoor use.
20
D Power Save function
"A_bL"
The Power Save function reduces current drain by periodi-
cally turning OFF the receiver circuit.
When no signal is received, and no operation is performed
-
for 5 seconds, the Power Save function is activated.
"Lcdc"
D Float Alert function
Alert periodically sounds while the radio is floating in the
water so that you can noticed that you dropped the radio.
Alert periodically sounds while the radio is floating in the
water .
D Automatic Water Draining function
This function automatically activates the AquaQuake Water Drain-
ing function when the radio has been retrieved from the water.
activated and A low vibration tone sounds for the specified
time period (2, 5 or 10 seconds).
"P_SA"
"FLAr"
"AquA"