Adjusting The Volume Level; Receiving And Transmitting - Icom IC-M25 Instruction Manual

4

Receiving and transmitting

CAUTION: Transmitting without an antenna can damage
the transceiver.
q Push [Y] or [Z] to select the channel.
w Hold down [PTT], and then speak into the microphone.
" appears while transmitting.
e Release [PTT] to receive.
2) Push to transmit.
4) Release to receive.
3) Speak into the microphone.
10
" appears.
1) Select a channel.
IMPORTANT: To maximize the readability of your trans-
mitted signal, pause for a second after pushing [PTT],
hold the microphone 5 to 10 cm (2 to 4 inches) from your
mouth and speak into the microphone at a normal voice
level.
For U.S.A version: To prevent prolonged transmission, a
time-out timer cuts OFF after 5 minutes of continuous
transmission.

Adjusting the volume level

You can adjust the volume level while the "VOL" icon is blinking.
q Push [VOL/SQL] once.
VOL" icon starts blinking.
returns to the normal mode.
w Push [Y] or [Z] to adjust the volume level.
e Push [VOL/SQL] twice.