Reading Parameters; Good Read Green Spot Duration - HP Linear Barcode Scanner II User Manual

6

Reading parameters

Move the scanner toward the target and center the aiming pattern and illumination system to capture and
decode the image. See
The aiming system will briefly switch off after the acquisition time, and if no code is decoded will switch on
again before the next acquisition. The illuminator will remain on until the symbol is decoded.
As you read code symbols, adjust the distance at which you are holding the scanner.

Good read green spot duration

Successful reading can be signaled by a good read green spot. Use the barcodes that follow to specify the
duration of the good read pointer beam after a good read.
Good read green spot duration
12 Chapter 6 Reading parameters
Using the scanner on page 2
ENTER/EXIT PROGRAMMING MODE
Green Spot Duration = Disable (Green Spot is Off)
Green Spot Duration = Short (300 msec)
Green Spot Duration = Medium (500 msec)
Green Spot Duration = Long (800 msec)
for more information.