JUNO JB096B5 User Manual page 22

22
Problem
The display shows "F102".
The display shows an error
code that is not in this table.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
Possible cause
• You did not fully close the
door.
• The door lock is defective.
There is an electrical fault.
The demo mode is activated.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
Remedy
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart-
ment.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
1. Deactivate the oven.
2. Press and hold the but-
ton .
3. When an acoustic signal
sounds, turn the knob for
the oven functions clock-
wise to the first function.
"Demo" flashes in the
display.
4. Turn the knob for the
oven functions to the off
position.
5. Release the button
6. Turn the knob for the
temperature clockwise
and hold it for three sec-
onds. The acoustic sig-
nal sounds three times.
The demo mode is deac-
tivated.
.