JRC JUL-6226 User Manual page 6

Don't use organic solvent for cleaning such as thinner and benzene because
this may damage the coating. Just wipe the surface with a clean dry cloth.
Befour plugging in or unplugging the coaxial cable between the AP-RFU and
If you have any questions about this equipment or if you want to make
inquires about failures, please contact our sales department.
AP-IFU, turn the power off.
CAUTION: The DC -48V power supply voltage for AP-IFU shall be SELV or TNV-1
depending on the network environment (0 or 1) acc. to IEC62102.
Befour plugging in or unplugging the coaxial cable between the AP-RFU and
Before plugging in or unplugging the coaxial cable between the 26G-
CAUTION: The Equipment for connection to AP-IFU Ethernet-interface(RJ-45)
AP-IFU, turn the power off. WIPAS2-AP-RFU and 26G-WIPAS2-AP-IFU, turn the power off.
shall be appropriate to connect to TNV-1 circuits.
CAUTION: The Equipment for connection to WT adapter PC-interface(RJ-45) shall
Do not look directly at the SC connector of the media converter
be appropriate to connect to TNV-1 circuits.
installed in this equipment or the end of the optical fiber connecting to
CAUTION: For the connection WT adapter to WT and a cable suitable for outdoor
the SC connector. This may harm your eyes because they use a
use shall be installed.
powerful light source.
CAUTION: For the connection Terminal Equipment to AP-IFU and a cables suitable
for outdoor use shall be installed.
CAUTION: For the connection AP-IFU to AP-RFU and a coaxial cable suitable for
outdoor use shall be installed.
For the address of our sales department, see the end of this manual.
Cautions