5.4 Switches
5.4.1 Switches on the AP-IFU
Power switch
This is the switch to supply power to the AP-IFU and AP-RFU.
ETHER1/ETHER2 switch
This is the switch to set AUTO or 100FULL.
(The shape of the switch may be changed.)
RST switch
This is the switch to reset the unit.
CAUTION: After changing the switch setting, you have to reboot the unit (power off and back on) to
enable the new setting.
Figure 5-18 Switches on the AP-IFU
OFF
ON
100
AUTO
FULL
ETHER1 AUTO
①
②
③
④
POWER LED
When on : Lit green
When off: Extinguished
ETHER AUTO LED
AUTO: Lit green
100FULL: Extinguished
Factory setting: 100FULL
5-35