Connecting Cables To The Wt Adapter - JRC JUL-6226 User Manual

5.2.4 Connecting Cables to the WT Adapter

Connect three cables to the WT adapter: Ethernet cable to connect the WT, Ethernet cable to connect
the PC, and AC adapter cable.
(1) Specification for the Ethernet cable to connect the WT and WT adapter:
Straight
(2) Specification for the Ethernet cable to connect the PC (PC port):
To PC: Straight
To the hub: Cross
To the router: Straight
PROHIBITION: Never connect your personal computer to the ANT port of the WT adapter. Doing so
may damage your personal computer.
CAUTION: The cable connecting between the WT and WT adapter carries 24 VDC for the WT in
addition to Ethernet signals. Before unplugging the cable connecting between the WT and WT adapter,
make sure to unplug the DC jack of the WT adapter to turn the power off. Otherwise, the unit may be
damaged.
CAUTION: The cable connecting the WT and WT adapter is a straight cable. Wrong connection may
damage the unit.
CAUTION: The Equipment for connection to WT adapter PC-interface(RJ-45) shall be appropriate to
connect to TNV-1 circuits.
CAUTION: For the connection WT adapter to WT and a cable suitable for outdoor use shall be
installed.
To your PC
Figure 5-17 Connecting Cables to the WT Adapter
To the WT
To the AC
d
5-33