5.1.6 Connecting a Cable to the AP-RFU (Horn Antenna)
Figure 5-11 Connecting a Cable to the AP-RFU (Horn Antenna)
CAUTION: +16VDC to be supplied to the AP-RFU is superimposed on the signals in the IF cable.
Turn off the power to the AP-IFU when installing or removing the IF cable. Otherwise, the unit may
be damaged.
CAUTION: Cover the cable connection with a cold-shrinkable sleeve to make it waterproof.
Otherwise, water may get in the connection.
To the AP-IFU
5-27
Cold-shrinkable sleeve
Coaxial cable with
an N connector
(IF cable)
To the AP-IFU