Adjusting The Burner; Instructing The System User - Viessmann VITOCROSSAL 300 Type CT3 Service Instructions Manual

Commissioning, inspection, maintenance
Further details regarding the individual steps
1. To dewater the condensate drain,
disconnect drain hose A.
2. Clean the inside of the condensate
drain once more with the plastic
brush.
3. Clean the siphon (if installed).
4. Clean the inside of the pipes of the
condensate drain system and the
neutralising system.
Neutralising system operating
instructions

Adjusting the burner

Observe the burner manufacturer's
instructions.

Instructing the system user

The installer should instruct the user in
the operation of the system.
16
A
5. Connect the line with a U-bend to the
condensate drain and fill with water or
fit a siphon and fill that with water.
Note
There is a risk of flue gas escaping if
the U-bend or siphon is not filled with
water.
6. Connect the supply line to the neu-
tralising system and make a correct
connection between the condensate
drain and the sewer entry.
(cont.)