Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOCROSSAL 300 Type CT3 Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
•
•
•
• • •
•
• •
• •
• •
• •
• •
• •
• •
• • •
• •
•
• •
•
• •
• •
• •
•
Commissioning steps
Inspection steps
Maintenance steps
1. Checking the high limit safety cut-out setting.............
2. Filling the heating system with water and venting......
3. Fully opening the rotary damper in the flue outlet and
locking it again................................................................
4. Commissioning the system...........................................
5. Minimising pulsation noise............................................
6. Shutting down the system.............................................
7. Opening the boiler door.................................................
8. Separating the neutralising system from the boiler
and connecting the drain hose......................................
9. Cleaning the combustion chamber and heating
surfaces........................................................................... 10
10. Checking gaskets and thermal insulation parts.......... 10
11. Checking all connections and the sensor well on the
heating water side for leaks........................................... 11
12. Checking the function of the safety equipment........... 11
13. Checking the diaphragm expansion vessel and
system pressure............................................................. 11
14. Checking the flue gas collector for leaks..................... 13
15. Cleaning the sight glass in the boiler door.................. 14
16. Closing the boiler door.................................................. 14
17. Checking the thermal insulation................................... 14
18. Checking the mixer for ease of operation and leaks... 14
19. Checking the water quality............................................ 15
20. Cleaning and reconnecting the condensate drain
system............................................................................. 15
21. Checking the installation room ventilation

Commissioning, inspection, maintenance

Page
7
7
7
7
8
9
9
9
5