Swinging The Post Into Position - Pfaff 8320-020 Instruction Manual

Adjustment
13

Swinging the post into position

.05
● Swing post 1 (four screws 2) into the required position.
● Check the setting of the feed rollers, see Chapter 13.04 Adjusting the feed rollers.
● Check the setting of the heating element, see Chapter 13.07 Adjusting the hot wedge
82
1
Fig. 13 - 03
on the PFAFF 8320-010 or Chapter 13.08 Adjusting the hot air nozzle on the PFAFF
8320-020.
2
2