Input
11.05
Advanced programming
11
Manual datasets
.05.01
The welding parameters for manual welding can be stored in the machine memory as reci-
pes. They are formally stored as programs in the number range 130 .. 149, and can be read
back from the machine memory as well. Recipes can also be copied from the machine
memory to an SD card and back (see chap. 11.02 Program Administration)
The function is activated via the parameter Enable Manprog = 1 (chap. 13.15.)
Recipes are created by way of an input of welding parameters and a description in the
comment fi eld.
Storing manual datasets (recipes)
● Call up program number selection.
● Call up manual input menu.
70
(recipes)
PFAFF 8320-010
PFAFF 8320-020