Adjustment
13
Changing the feed rollers
.03
● Switch on the machine and set the sealing temperature at its minimum value.
● Call up the input menu.
● Lock the feed rollers.
● Change feed rollers 1 (screws 2).
● Check the position of the feed rollers and correct it if necessary, see
● Switch off the machine.
80
Fig. 13 - 01
Let the heating element cool down!
Danger of burns if the heating element is touched!
If there is a difference between the diameters of the old and new feed
rollers, the machine must be re-confi gured, see Chapter 13.12.01 Machine
confi guration.
Chapter 13.04 Adjusting the feed rollers.
2
2
1
1