Stipulating The Hot Wedge Type (Only On The Pfaff 8320-010); Adjusting The Contact Pressure Of The Hot Wedge (Only On The Pfaff 8320-010) - Pfaff 8320-020 Instruction Manual

Preparation
9 Stipulating the hot wedge type
.03.03
● Select the hot wedge type in accordance with the width of the hot wedge installed.
9 Adjusting the contact pressure of the hot wedge
.03.04
34
The symbol for the selected hot wedge type appears as an inverse symbol.
Hot wedge Hot wedge version
type
1
Heating cartridge with integrated temperature sensor and fast control
response (width 7 mm, 9 mm and 12 mm, 360 W)
2
Heating cartridge with external temperature sensor and medium control
response (width 15 mm, 20 mm and 30 mm, 500 or 1000 W)
3 Heating cartridge with external temperature sensor and slow control
response
(width 7 mm, 9 mm and 12 mm, 360 W)
(width > 30 mm, 1000 W)
1
Fig. 9 - 02
(only on the PFAFF 8320-010)
(only on the PFAFF 8320-010)
● Loosen the locknut 1.
● Adjust the pressure by turning the nut 2
in accordance with the sealing operation,
also see Chapter 13.06.02 Hot wedge
pressure on and clearance to the feed
rollers.
● Tighten locknut 1.
2