Stop With Light Barrier; Start With Light Barrier - Pfaff 8320-020 Instruction Manual

11

Stop with light barrier

.05.02
This function is activated via the parameter Stop with IN1 = 1 (see chap. 13.15.)
A light barrier will be connected to the programmable input IN1 (X8/2).
The activated light barrier will then terminate the welding process.
11

Start with light barrier

.05.03
This function is activated via the parameter Start with IN2 = 1 (see chap. 13.15.)
A light barrier will be connected to the programmable input IN2 (X8/3).
The activated light barrier will then start the welding process.
Once the function has been activated, IN1 can no longer be used for zone
forwarding in programs.
Once the function has been activated, IN2 can no longer be used for zone
forwarding in programs.
Input
73