Conduit/Cable Entries - Emerson Rosemount 214C Quick Start Manual

Quick Start Guide
NOTICE
This guide provides basic guidelines for Rosemount 214C Sensor models.
If the sensor was ordered assembled to a temperature thermowell or transmitter, see the appropriate product
literature for information on configuration and hazardous locations certifications.
Explosions could result in death or serious injury.
Installation of this sensor in an explosive environment must be in accordance with the appropriate local,
national, and international standards, codes, and practices.

Conduit/cable entries


Unless marked, the conduit/cable entries in the transmitter housing use a
marked "M20" are M20
have the same thread form.

When installing in a hazardous location, use only appropriately listed or Ex certified flameproof/dust plugs,
adapters, or glands in cable/conduit entries.

Only use plugs, adapters, glands, or conduit with a compatible thread form when closing these entries.
Contents
Wiring diagram for RTDs
Wiring diagram for thermocouples
2
1.5 thread form. On devices with multiple conduit entries, all conduit entries will
3
. . . . . . . . . . . . . . . .
4
. . . . . .
1
/
2
Product certifications
Installation drawings
August 2017
–14 NPT thread form. Entries
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
5
10