Ups Shutdown - Powerware 9150 User Manual

UPS Shutdown

To shut down the UPS:
Powerware 9150 User's Guide
®
1. Remove the front panel. Lift from the bottom of the panel and
then pull out (see Figure 17).
2. Turn the Maintenance Bypass switch to the SERVICE or BYPASS
position.
3. Turn off the UPS ON/OFF switch (the
4. Turn the UPS battery circuit breaker CB1 and optional CB2 to
the OFF position.
The UPS stops supplying power and is disconnected internally
from the batteries. The load is powered by the utility.
:
www.powerware.com
Operation
position).
43