Clock And Alarm Settings; Date And Time Settings - Binatone Eclipse Plus User Manual

8

CLOCK AND ALARM SETTINGS

8.1 Date and Time Settings

If you have subscribed to the Calling Line Identification service, the time
and date settings will be automatically updated by the network when you
receive an incoming call, but you may still need to set the correct year.
You can also set the date and time manually.
- On Your Main Eclipse Handset
1. From the home screen, press
+
2. Press
M
3. Press
• The last stored date is displayed, with the third digit of the year
flashing.
Enter the current date and press
4.
date format is MM/DD.
Enter 03 May 2012 as [1], [2], [0], [5], [0], [3].
If you make a mistake, press
5. Enter the current time and press
format is 12 HOURS. (To change time format, see Change the Date
Format on page 52.)
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter the time and then press
am , or press
If you make a mistake, press
• A confirmation tone is played.
O
6. Press
-
/ to CLOCK&ALARM and the press
again to select DATE & TIME.
-
to select pm.
to return to standby mode.
M
.
M
to confirm, the default setting
m
to delete the last digit entered.
M
to confirm. The default time
m
to delete the last digit entered.
49
M
to select.
+
to select