Set The Date; Alarm Settings; Turn On/Off The Alarm - Binatone SPEAKEASY COMBO 2005 TRIPLE User Manual

8.1.4

Set the Date

1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select SET DATE.
4. Press <MENU/OK> and then enter the date in the format you set in
Section 8.1.1.
5. Press <MENU/OK> to confirm.
Note: If the date has been set before, the curre nt date will display,
otherwise it will show the date starting from "
up or a reset.
8.2

Alarm Settings

You can set an alarm time on the handset. When an alarm is set, the
<ALARM Icon> is shown on the handset display.
When the alarm time is reached, the <ALARM icon> and "ALARM ON" flash
on the handset display and the alarm melody plays for 45 seconds. You
can press any key to disable the alarm. If the snooze function is activated,
the alarm will sound again at the end of the snooze period of seven minutes.
Note:
a. A key press will still disable the alarm even if the handset keypad is
locked when the alarm rings.
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to VOLUME OFF, the alarm still
sounds at VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the
alarm time is reached, the <ALARM icon> and "ALARM ON" will still
flash. An alarm tone will be emitted from the earpiece to notify user the
alarm time is reached. Once the user presses any key or presses and
holds <OFF> to disable the alarm, it will revert to the call duration screen.
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no
paging or ringing, the alarm will sound again at the end of the snooze
period.
8.2.1

Turn on/off the Alarm

1. Press <MENU/OK> and <UP/DOWN> to select HS
2. Press <MENU/OK> to show ALARM.
3. Press <MENU/OK> and <UP/DOWN> to select ON/OFF.
4. Press <MENU/OK> to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
01-01-11
SETTINGS.
26
"after power
.