Eiki EK-815U Service Manual page 62

6. Waiting for about several minutes, it shall be
upgraded done,on the way there will be suspected
stuck motionless, please do not forced to shut
down.
7. When appear " Programming completed", PW808
firmware upgrade procedure is finished.
Note:
(1) The laser will not operate.
(2) After upgrade finished, remove the power code.
(3) 32-bit system need to install mini-USB driver
manually.
-Right-click "computer"
-Click" Manage"
-Click"Device Manager"
-Righter-click "Unknown Manager"
-Install the driver
-Click "Browse my computer for driver software"
-Click "Browse"
-Select "FlashUpgrader_x32_driver"
-Click "OK"
-Click "Next"
EK-815U 5-9