Eiki EK-815U Service Manual page 45

(4) Enter the code "1,5,9,0" by remote controller or Press
the button "LEFT +DOWN+RIGHT+UP" by keypad to
access service mode.
(5) Enter "OK" to get into service mode.
Item Label
1 Factory Reset
2 Filter Wheel Index
3 Phosphor Wheel Index
4 Error Log
5 Mode Adjustment
6 Reset Projector Hours
7 Light Sensor Calibration Choose this function to execute ABC calibration
8 ADC Calibration
9 LD Hours
Restore all settings to their default value,It will not reset network
Adjust the R/G/B value to get perfect image when image loss some kinds of color
Adjust the R/G/B value to get perfect image when image loss some kinds of color
Record the times of the failure of power on of projector
Image adjustment of vertical and horizontal position
Reset Projector Hours
Choose this function to execute ADC calibration
Record the LD Hours
Description
EK-815U
Confidential
4-2