Complete The Mounting - Adp HandPunch Quick Installation Manual

9. Complete the Mounting

To complete the installation of the HandPunch, insert the
supplied key into the lock on the left side of the HandPunch
and rotate it clockwise (towards the front of the HandPunch)
until it stops.*
Gently swing the HandPunch upward to its operational position,
pressing the unit to the wall. Rotate the key counterclockwise
(towards the wall) to lock it in position.
Remove the key and store it in a safe place.
Lock
* Note: Do not attempt to close the unit without first rotating
the key clockwise. Failure to turn the key first may
permanently damage the unit.
19