Table of Contents
Advertisement
4. Sheetrock Wall Installation
Using the Phillips screwdriver, screw the auger style
connectors into the wall at the top two marks. Only screw
these until they are flush with the wall.
Drill ¼ inch holes at the marks for the bottom 3 screws.
Insert the molly fasteners in these bottom 3 holes and screw
them until they expand; then completely unscrew these
screws.
You are now ready to fasten the mounting plate to the wall.
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HandPunch and is the answer not in the manual?
Questions and answers