Advertisement
SAFETY RULES FOR PROFILE SANDER
1. ALWAYS DISCONNECT
accessories or abrasives.
2. USE PROPER SAFETY EQUIPMENT.
protective mask to minimize breathing in the fine dust created while sanding.
wood contains preservatives which can be toxic, Take extra care to prevent inhalation and skin
contact when working with these materials. Request, and follow, any safety information
available from your material supplier.
3. SANDING OF LEAD-BASED PAINT IS NOT RECOMMENDED.
be removed by a professional.
Voltage suppl y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V A-weighted noise levels
Power consumption . . . . . . . . . . . . . . . . . . . . . . 210W
Power output . . . . . . _ ._...____................. 12OW
Frequency . . ..__........................... 50-60 Hz
Strokes per minute (max.).... 6,000 RPM Typical Mean effective Acceleration (Front).. 5.6 m/s2
REPLACEMENT PARTS
When servicing use only identical replacement parts.
FOREWORD
The FLEX Profile Sander provides an "in-line" sanding motion that permits sanding of corners,
profiles, and other areas that are inaccessible to other power sanders. A wide variety of pads,
profile holders, profiles, and abrasives are available to meet the requirements of various
applications (see FLEX Catalog).
There is a wide variety of accessory pads, profile holders, and profiles available
NOTE:
to fit the FLEX Profile Sander. Please refer to your FLEX Catalog to determine which of
these items are supplied as standard equipment with each particular Profile Sander
Package. All of these items are available as Accessories, and they may be used with any
FLEX Model PS 206 Profile Sander.
SELECTING A PAD OR PROFILE MOUNTING PLATE
Select the Sanding Pad or Profile Holder that best fits your application:
A.
Diamond Pad for Hook & Loop Abrasives:
corners and intricately shaped areas. Precut, Hook & Loop Abrasives with dust extraction holes
are used with this pad. The 259.593 Dust Wand (and an external vacuum source), can also be
used with this pad to provide dust collection.
B.
Single Profile Mounting Plate:
vertical position, centered under the Profile Sander, Special PSA Abrasives are available in rolls
that can be cut-to-fit the various profiles.
the sander cord plug from the power circuit before changing
Wear safety goggles to protect your eyes and wear a
TECHNICAL SPECIFICATIONS
Sound pressure l e vel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80.7 dB
Sound power l e vel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93.7 dB
WEAR EAR PROTECTION!
Typical Mean effective Acceleration (Back) . ..1.4 m/s2
Weight w/case and accessories . . . . . . . . . . . . . . . . . . . 1.7 kg
OPERATING INSTRUCTIONS
PREPARATION FOR SANDING
The pointed tip of this pad is used for sanding into
This plate is used to mount any one of the profiles, in a
NOTE:
Lead-based paint should only
Some
Advertisement
