There is a wide variety of accessory pads, profile holders, and profiles available NOTE: to fit the FLEX Profile Sander. Please refer to your FLEX Catalog to determine which of these items are supplied as standard equipment with each particular Profile Sander Package.
Follow with a second sanding using a grit one or two grades finer. Continue with successively finer grits until the desired finish is obtained (see FLEX Catalog). Cut, do not tear, the abrasive rolls to size.
Page 4
Accessory, and may be used with any FLEX Model PS 206 Profile Sander. The 259.593 Dust Wand is used with the Model PS 206 Profile Sander, the 259.591 Hook & Loop Pad and corresponding Abrasives. The dust wand requires an external vacuum source (shop vat or dust collection system).
FINE FINISHING The action of the FLEX Profile Sander causes thousands of tiny abrasive grits to move against the work at high speed. Each grain moves in the same direction at a constant speed so the cutting action is uniform over the entire pad surface.