Calibrating The Screen - Newland NLS-PT60 User Manual

Calibrating the Screen

Tap "Start"→"Settings"→"Control Panel"→ double tap . Then the Stylus Properties screen will be displayed.
Select the "Calibration" tab and tap the "Recalibrate" button. Then the Calibration screen will be displayed. Read the on-
screen instructions, and carefully press and hold the tip of stylus on the center of each target that appears on the screen
for 2-3 seconds. Repeat as the target moves around the screen, then press the Enter key to accept the new calibration.
Stylus Properties screen Calibration screen
13