Troubleshooting - Newland NLS-PT60 User Manual

Troubleshooting

Problem
Type Description
Unresponsive keypad or
Keypad incorrect response to any key
entry.
Charging LED is OFF when
charging.
Noticeably short battery life.
Battery
Fully charged battery is
depleted after the terminal is
switched on.
USB USB communication failure
LCD
No display
Screen
Cannot switch on
System
System halted
This problem may be caused by unreliable cable connection between keypad
and mainboard or keypad malfunction. Please contact Newland after-sales
service.
Ensure the AC adapter is plugged in properly.
1. Check the battery level. If the battery is almost depleted, recharge it.
2. Replace the battery if it is faulty.
If the battery is faulty, replace it with a new one.
1. Ensure that the USB cable connections are secure.
2. Ensure that there is no foreign material in the Micro USB port.
3. If the problem still remains, please contact the after-sales service center.
1. Ensure the terminal is switched on.
2. If the terminal is in sleep mode, press the Power key to wake it up.
3. Check the battery level. If the battery is depleted, recharge it.
4. Ensure that the battery is properly installed.
5. Replace the battery if it is faulty.
6. If the problem still remains, please contact the after-sales service center.
1. Check the battery level. If the battery is depleted, recharge it.
2. Switch the terminal on after connecting it to a power outlet using the included AC
adapter. If the problem disappears, then continue to charge the terminal. If the problem
remains after charging the terminal for a while, replace the battery with a new one.
1. The problem may be caused by bugs of downloaded apps. Ensure that only reliable
apps are used.
2. The problem may be caused by a sudden or unexpected power loss. Hold down
the Power key and "#" key at the same time for 10 seconds to reset the terminal.
Possible Cause & Solution
48