Resetting the PT60
Warm Reset
Hold down the "#" key for 8-10 seconds to perform a warm reset on the terminal. It will take 6-10 seconds for the terminal
to restart the system. User data in the memory will not be lost.
Cold Reset
Hold down the Power key and "#" key at the same time till the terminal displays the loading screen.
It will take 16-20 seconds for the terminal to reboot. After a cold reset, the terminal will restore factory default settings and
user data that is not in MicroSD card or flash disk will be lost. You can use the backup/restore tool to restore backup data.
Note: Make sure that the battery cover is closed before performing a warm or cold reset, otherwise the terminal
will immediately enter the suspend/sleep mode after restarting.
Autolocking the PT60
The program
time of inactivity.
Tap "Start"→"Settings"→"Control Panel"→double tap
29
is used to set the terminal to automatically lock its screen and keypad after a preset period of
. Then set the parameters as per your needs.