Power On, Suspend And Wake Up; Calibrating The Screen; Checking Battery Statues - Newland NLS-PT30 Series User Manual

Power On, Suspend and Wake Up

 Power On:
Long press the power button for 2-3 seconds to start the terminal.
 Suspend:
During terminal in power on status, long press the power button for 2 seconds to turn terminal into suspend mode
immediately.
Terminal no operation in a period of time will go into suspend mode,when you turn on the auto suspend function.
The timer for automatically into suspend mode can be set by:
Tap "Start"→"Settings"→"ControlPanel"→double clicks "Power"→"schemes".
 Wake Up:
During terminal in suspended status, press power button to wake up the terminal.

Calibrating the Screen

The touch screen calibration tool is for setting accuracy of the touch screen.
Tap "Start"→"Settings"→"Control Panel"→ double clicks "Stylus"→"Calibration".
Click "Recalibrate" button then the screen becomes as shown in Figure 2.2.Carefully press and briefly hold the tip of stylus
on the center of each target that appears on thescreen.Repeat as the target moves around the screen then tap the screen
to continue.

Checking Battery Statues

To check the charge status of the main battery in the terminal.
Tap "Start"→"Settings"→"System"→double clicks"Power".
Figure 2.1: Calibration Figure 2.2: Recalibrate
6