Magnimage LED-500CD User Manual page 32

FADE function shortcuts：
In the"non-menu
fade in fade out switching state as below：
Tips：
1、In the shortcut menu, you can switch input port for the bottom layer, but it is not
safe behavior, because in the absence of pre-monitoring situation, you can not
accurately grasp the switching time. So please determine in advance which of the two
inputs would get into the fade switch process.
2、 In non-menu state, press "FADE" key to perform fade in & out operation, after the
menu enter to fade menu state, in the first line by using"FADE"、"OK"、"LEFT"and
"RIGHT"key to perform fade in and out process; High light characters is now display
signal port, channel 1 input port name is on the left, channel 2 input port name is on
the right. If there is"╳"beside the port name, means that there is no valid signal under
the port.
3、 The limitation of the fade in fade out function port, please check the
input source conflict
30
state"[ 11], press"FADE"button, the menu system will enter the
VGA1 <- 【OK】 -> DVI
Fade Period
Multi Connection
Reset
list. [ 22]。
0S
>>
>> ▼
Dual pictures