Magnimage LED-500CD User Manual page 26

Fade In&Out Switch
Fade In&Out "
Switch the left side shows the name of the input port of channel 1, channel 2 on
the right shows the input port name; sample The cursor is on the left, the
port name is VGA1, next to the"╳"that no valid signal under VGA1 input
port; use the "OK" , " FADE" , " LEFT" or "RIGHT" key, between the two input
ports Fade to switch; use the"input port selection key"could switch the
under layer port to the appropriate port（Do not conflict with the top layer
port, Please refer to
Please note, if"╳"is shown beside the port name, there is no valid signal
under the port, the actual display was a black screen.
Fade Period The process of fade in fade out can experience for 0 second to 5 seconds.
If set to 0 seconds, then switching process would be finished
instantaneously.
Multi Multi machine combined setting, combination switching function setting
Connection machine
Reset Press"RIGHT"or"OK"to reset the parameter in the fade in fade out
function.
24
VGA1 ╳ <- 【OK】 -> DVI", as shown in the left example, "【OK】"
Dual pictures input source conflict list [ 22]）