Dodge CHARGER Hellcat 2017 User Manual page 62

G E T T I N G S T A R T E D
Easy Entry/Exit Seat
This feature provides automatic driver's seat positioning to enhance driver mobility when
entering and exiting the vehicle.
The distance the driver's seat moves depends on where you have the driver's seat
positioned when you cycle the vehicle's ignition to the OFF position.
• When you cycle the vehicle's ignition to the OFF position, the driver's seat will move
about 2.4 inches (60 mm) rearward if the driver's seat position is greater than or equal
to 2.7 inches (67.7 mm) forward of the rear stop. The seat will return to its previously
set position when you cycle the vehicle's ignition to the ACC or RUN position.
• The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than
0.9 of an inch (22.7 mm) forward of the rear stop. At this position, there is no benefit
to the driver by moving the seat for Easy Exit or Easy Entry.
Each stored memory setting will have an associated Easy Entry and Easy Exit position.
NOTE:
The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory.
The Easy Entry/Exit feature is enabled (or later disabled) through the programmable
features in the Uconnect system. Refer to "Uconnect Settings/Customer Programmable
Features" in "Understanding Your Instrument Panel" in your Owner's Manual on
www.dodge.com/en/owners/manuals for further details.
Manual Seat Adjustments
Forward Or Rearward Adjustment
The adjusting bar is at the front of the seat, near the floor. Pull the bar upward to move the
seat forward or rearward. Release the bar once the seat is in the position desired. Using
body pressure, move forward and rearward on the seat to be sure that the seat adjusters
have latched.
60
Manual Seat Adjustment
1 — Recliner Lever
2 — Adjustment Bar