Manual Park Release - 8 Speed Transmission - Dodge CHARGER Hellcat 2017 User Manual

W H A T T O D O I N E M E R G E N C I E S
6. Once the engine is started, remove the jumper cables in the reverse sequence:
Disconnecting The Jumper Cables
1. Disconnect the negative (-) end of the jumper cable from the remote negative (-) post
of the vehicle with the discharged battery.
2. Disconnect the opposite end of the negative (-) jumper cable from the negative (-) post
of the booster battery.
3. Disconnect the positive (+) end of the jumper cable from the positive (+) post of the
booster battery.
4. Disconnect the opposite end of the positive (+) jumper cable from the remote positive
(+) post of the vehicle with the discharged battery.
If frequent jump starting is required to start your vehicle you should have the battery and
charging system inspected at your authorized dealer.
Accessories plugged into the vehicle power outlets draw power from the vehicle's
battery, even when not in use (i.e., cellular devices, etc.). Eventually, if plugged in long
enough without engine operation, the vehicle's battery will discharge sufficiently to
degrade battery life and/or prevent the engine from starting.
MANUAL PARK RELEASE — 8 SPEED TRANSMISSION
Always secure your vehicle by fully applying the parking brake, before activating the
Manual Park Release. In addition, you should be seated in the driver's seat with your
foot firmly on the brake pedal when activating the Manual Park Release. Activating the
Manual Park Release will allow your vehicle to roll away if it is not secured by the
parking brake or by proper connection to a tow vehicle. Activating the Manual Park
Release on an unsecured vehicle could lead to serious injury or death for those in or
around the vehicle.
In order to move the vehicle in cases where the transmission will not shift out of PARK
(such as a dead battery), a Manual Park Release is available.
200
CAUTION!
WARNING!