Table of Contents
Advertisement
GRYPHON™ BT
GRYPHON™ BT OPERATION
RADIO CONNECTION
Gryphon™ BT as Slave
A Gryphon™ BT is Slave when it sends barcodes to a Master remote
®
Bluetooth
device such as a PC, Laptop, PDA, etc, which has initialized the
communication.
Once set as Slave, a Gryphon™ BT reader requires no particular configuration
for communication, however some radio parameters can be set to increase
system performance and data transmission security, see the Gryphon™ BT
Reference Manual on the configuration CD-ROM. At startup the reader can only
wait for the Master to initialize the radio communication.
The following is a general procedure recommended for Gryphon™ BT Slave
applications:
1.
Power up the remote Bluetooth
PC).
2.
Power up the Gryphon™ BT reader within radio range (10 meters).
Any modifications to the radio configuration should be made at this time
before the radio connection takes place.
3.
From the remote Bluetooth
procedure, (according to the procedure given in the documentation of the
®
Bluetooth
Master device), to recognize the Gryphon™ BT reader(s)
within radio range.
4.
Check that "Gryphon BTx00
devices.
5.
Request to open an SPP connection with Gryphon™ BT, making
sure to disable any required PIN and/or pairing parameters. Gryphon™ BT
is always discoverable and connectable without any required PIN.
After the Gryphon™ BT reader indicates radio connection (see the
Indicator
table), you can start sending barcodes.
If the Master remote Bluetooth
communication can be established with up to 7 seven Slave readers at the
same time.
®
Master device (example Laptop or
®
Master device, execute the Discovery
" is shown among the discovered
®
device can support a piconet, the
UK/US
Status LED
5
Hide quick links:
Advertisement
Table of Contents
