Reading Angle - Datalogic GRYPHON BT100 Quick Reference

UK/US
USING GRYPHON™ BT SERIES READERS
Gryphon™ BT series readers, together with a Bluetooth
device, build a Cordless Reading System for the collection, decoding and
transmission of barcoded data.
The Gryphon™ BT (Gryphon™ Bluetooth
scanner communicating in the 2.4 GHz ISM band and using the Serial Port
Profile (SPP). The Bluetooth
printer, etc with a built-in Bluetooth
®
(i.e. a Bluetooth dongle).
Using this Quick Reference Manual, you can initialise and start using
Gryphon™ BT reader with its default values. For details about general
configuration commands, refer to the Gryphon™ BT Refence Manual on
the configuration CD-ROM.
Gryphon™ BT readers automatically scan barcodes at a distance. Simply aim
the reader and pull the trigger. Code scanning is performed along the center of
the light bar emitted from the reading window. This bar must cover the entire
code.

READING ANGLE

Successful scanning is performed by tilting the reader with respect to the
barcode to avoid direct reflections which impair the reading performance, see
the figure below.
Successful reading is signalled by an audible tone plus a good-read blue spot.
Good read LED
Good read spot
OK
To start using your Gryphon™ BT reading system you must:
1. Have a compatible remote Bluetooth
or an external Bluetooth
compatible device documentation.
2. Charge the Gryphon™ BT battery using C-GRYPHON charger as
described in this Quick Reference manual. A full charge takes 4 hours
with NiMh batteries.
3. Configure the reader as described in this Quick Reference manual under
"Gryphon™ BT Configuration".
2
®
) reader is a CCD wireless barcode
®
compatible remote device can be a PC, PDA,
®
device or with external Bluetooth
Not Advised
®
device (with built-in Bluetooth
®
adapter) ready to work. See your Bluetooth
DATALOGIC
®
compatible remote
®
adapter
®
radio
®