Datalogic GRYPHON BT100 Quick Reference page 8

UK/US
GRYPHON™ BT AS MASTER
Note: for the hexadecimal character selection of step 4, use the table at the
end of this manual.
1.
2.
3.
Set Remote Bluetooth
4.
12 hexadecimal characters for the remote Bluetooth
5.
6. Request Radio Connection with Slave
YOUR READER IS NOW CONFIGURED TO READ BARCODES USING THE
DEFAULT VALUES.
8
Restore Gryphon™ BT default
Set Gryphon™ BT as Master
Enter configuration
®
Device Address (slave)
+
Exit and Save configuration
DATALOGIC
®
device address