Microsoft Windows Me - Lucent Technologies CellPipe 20A-USB User Manual

Microsoft  Windows  Me
TCP/IP settings are automatically set up during the software installation process. The
following procedure may be used to change TCP/IP settings, if necessary.
1. From your Desktop, open the Dial-Up Networking window (Start - Settings – Dial-Up
Networking).
2. From the "Dial-Up Networking" window, right click on the Lucent Dial-Up PPP
Connection icon and select Properties.
3. From the "Networking" tab of the "Lucent Dial-Up PPP Connection" window, select
TCP/IP (marked with a check in the box to the left) and click TCP/IP Settings.
CellPipe USB Series User's Guide
Chapter 7 Modifying TCP/IP Options – ATM USB Driver
35