Table of Contents
Advertisement
Chapter 2 CellPipe 20A-USB Hardware Installation
Chapter 2 CellPipe 20A-USB Hardware
Installation
The CellPipe 20A-USB unit is connected to the USB port on your computer via a standard
USB cable.
Install the CellPipe 20A-USB as follows:
1. Turn on your computer.
2. Insert the rectangular end of the USB cable into the USB port of your computer.
3. Insert the square end of the USB cable into the USB port of the CellPipe 20A-USB.
USB port
4
CellPipe USB Series User's Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the CellPipe 20A-USB and is the answer not in the manual?