Carrier Zone Manager Owner's Manual page 9

Zone Manager
System programming
Programming zone periods
WARNING:
Each zone can have a maximum of 4 periods.
• Press the " " button.
PROGRAM
" 1" and " 1" are first displayed for the current day.
ZONE PERIOD
The current time programmed for that period will flash
indicating a change can be mode if desired.
1st period programming zone 1:
• Press "up" or "down" buttons to set the time according to
your personalized schedule.
• Premere il tasto " /
SET TIME
Sul display lampeggia il valore della temperatura.
• Press "up" or "down" buttons to adjust the temperature
setting to match your personalized schedule.
2nd, 3rd, and 4th period programming:
• Press " ".
NEXT PERIOD
The next period appears on the display (
• Repeat the operations for the first period to program the time
and temperature.
• Do the same for periods 3 and 4.
• If a period is not needed select the time as shown that can be
reached after 23:45.
• Press the " " button to exit programming.
END PROGRAM
GB - 8
up
down
".
TEMP
up
down
2).
PERIOD