Carrier Zone Manager Owner's Manual page 11

Zone Manager
System programming
EXAMPLE:
We want to copy the setpoints of zone 1 into zone 2 or a zone
successive to it.
• Press the " " button.
PROGRAM
Zone 1 with the time blinking appears on the display.
• Press the " " button to move to the next zone.
NEXT ZONE
Zone 2 with the time blinking appears on the display.
• Press the " " button.
COPY ZONE
• Press the " " button to exit programming.
END PROGRAM
Day copying
When all the setpoints for a day have been programmed the
day program can be copied to another day. Two ways exist:
COPYING ONE DAY ONTO THE NEXT IN THE SAME ZONE
• Select the day you want to copy.
• Press " ".
NEXT DAY
The day following the day to be programmed appears on the
display.
• Press " ".
COPY DAY
The programming is copied for all the setpoints of the four
periods of the new day.
• Press the " " button to exit programming.
END PROGRAM
COPYING THE SAME DAY OF THE WEEK FROM ONE ZONE
TO THE NEXT
Select the day and zone to be copied on the display.
• Press the " " button to move to the next zone.
NEXT ZONE
• Press " ".
COPY DAY
The programming is copied for all the setpoints of the four
periods of the new day.
• Press the " " button to exit programming.
END PROGRAM
GB - 10