Carrier Zone Manager Owner's Manual page 10

Zone Manager
System programming
Operation mode programming
• Press the " " button.
PROGRAM
• Press the " " button to select the day to program.
NEXT DAY
• Press the " " button.
MODE
Each press changes the programming mode.
The selected zone units are switched on.
ON
The selected zone units are switched off.
OFF
The selected zone units are in "energy saving" mode.
SETBACK
EXAMPLE:
Setpoint: 12,00 with "
SETBACK
WARNING:
The " " function can only be selected if "
SETBACK
operation is selected (see "Setting mode operation").
• Continue programming selecting the zone and periods for
setpoint definition.
Copying a zoning schedule
To assist in creating schedules for all your zones, the Zoning
System Manager includes a "
When programming, this eliminates the need to re-enter
identical information for each zone.
• Press the " " button. Program a zone schedule.
PROGRAM
• Press the " " button to move to the next zone.
NEXT ZONE
• Press the " " button.
COPY ZONE
The previous zone's schedule will be copied into the zone.
Continue copying the programming for the other zones of
interest.
• Press the " " button to exit programming.
END PROGRAM
NOTE:
This function copies all the days of the previous zone into the
current zone.
" function inserted.
"
AUTO
" button.
COPY ZONE
E N G L I S H
GB - 9