Carrier Zone Manager Owner's Manual page 12

Zone Manager
Example of general programming
Access to programming:
- Press " ".
PROGRAM
Setting the mode, fan speed, and air flow:
- Press " " and select "
MODE
- Press " " and select the speed.
FAN
- Press " " and select "
LOUVER
- Press "
NEXT ZONE
- Press "
NEXT PERIOD
Programming the 1st day:
- Press " " and select "
NEX DAY
Programming 4 periods
PROGRAMMING THE MODE OF THE 1ST PERIOD:
- Press " " and select "
MODE
( can only set "
SETBACK
Press "up" o "down" for the time setpoint.
Press "
SET TIME
Press "up" o "down" to set.
REPEAT THE PROGRAMMING FOR OTHER PERIODS:
Selection next zone and setpoint programming
- Proceed as for zone "1".
Programming the 2nd day:
- Proceed as for the first day.
- Press " ".
END PROGRAM
".
AUTO
".
SWING
Select zone "1"
" and select "1".
" and select "1".
"
MO
/ / "
ON OFF SETBACK
" if operating Mode is "
" to select the temperature.
for the 4 periods:
End of programming:
E N G L I S H
") .
AUTO
GB - 11