Carrier Zone Manager Owner's Manual page 6

Zone Manager
Normal operation
Setting mode operation
• Press the " " button.
MODE
On the display readout, the words "
and " " will rotate as the "
FAN ONLY
All the units in the displayed (selected) zone are
OFF
switched off.
The temperature, fan speed and louver operating mode
indications disappear from the display.
NOTE:
If the temperature sensor in the Zone Manager is "ON", the
room air temperature will be displayed and the Setpoint
disappear from the display.
Your system will heat or cool as needed to reach your
AUTO
desired temperature.
Cooling operation
COOL
Drying operation
DRY
Heating operation
HEAT
Ventilation operation only
fan only
The temperature indication disappears from the display.
NOTE:
The operating mode setting applies to the zone selected on the
display.
", " ", " ", "
OFF AUTO COOL DRY
" button is pressed.
MODE
"
E N G L I S H
GB - 5