Superabrasive
3. HANDLING AND TRANSPORTATION
SEPERATING THE CARRIAGE FROM THE MAIN HEAD
Figure 3.1
Unplug the motor cable plug from the control box (Fig.
3.1) and disconnect the water hose from the main head
by pulling it out (Fig. 3.2). Wind the electrical cable on
the carriage. Release the pin sets (Fig. 3.3) which attach
the head to the carriage.
Pull out the vacuum hoses, and dismount the head from
the carriage (Fig. 3.4).
The head of the LAVINA® X machine has one
bar and a support which can be used as handles for easy
moving and transportation (Fig. 3.4). The LAVINA® X
machine is engineered with easy transportation in mind. The ability tо dismantle the machine in two parts allows for convenient
transportation and storage (Fig.3.4, Fig.3.5).
ADJUSTING THE HANDLE
The Handle on the frame is adjustable in height and allows the operator to work in a correct and safe posture.
Figure 3.6
Pull out the hose from the tank (Fig.3.8)
Using compressed air, blow out excess water from the system at each position of the valve (Fig. 3.9, Fig. 3.10)
Figure 3.8
User Manual
Figure 3.2
Figure 3.7
When, during storage of the machine, the temperature may fall to 32
emptied from the system using the following steps:
Original Language
Figure 3.3
Figure 3.4
To adjust, simply pull the locking pin (fig.3.6) and move the frame. A
loaded spring will return the pin and lock the handle in any of several
positions (fig.3.7). Choose the vertical position to easily move the
machine.
STORAGE
Always store and transport the LAVINA® X machine in a dry place.
Never transport the LAVINA® X machine unprotected; it may be
damaged if transported unprotected during rain or snow.
Figure 3.9
8
Lavina® 20N‐X
Figure 3.5
o
o
F (or 0
C) or less, water should be
Figure 3.10
6/2017