Tools And Accessories; Weights; Tool Holder Key; Foam Plate - lavina 20n-x User Manual

Superabrasive
5. TOOLS AND ACCESSORIES
Figure 5.1
Figure 5.3
Figure 5.4
Figure 5.5
User Manual
WEIGHTS
Superabrasive offers additional weights used to increase the productivity of the machine
(Fig.5.1). Each additional weight weighs about 64 lbs or 29kg. Each individual application, type
and condition of surface, power capacity of the outlet, etc. will determine the number of
weights you can use without tripping a breaker. The weights stack onto three posts fixed
around the outer bowl (Fig.5.2). Additional weights will largely depend on the tools; it is not
always possible to add weights. Some tools work too aggressively and will cause the machine
to stop. The weight can be ordered with item number A08.00.00.00
Figure 5.2
TOOL HOLDER KEY
The tool holder key (Fig.5.3) is used for adjusting, mounting and dismounting of the foam plates.
Always use the key to properly secure foam plates.
Item number is A03.00.00.00
FOAM PLATE
Diamond tools with Velcro are mounted on the foam plate 9"(Fig.5.4). The foam plate is mounted on
the "QuickChange"System.
Item number is LV‐9‐FP‐S
SECURITY PLATE FOR QUICKCHANGE PADS
Plate (Fig.5.5) used to secure the "QuickChange" pads.
Item number is A38.00.01
Original Language
13
Lavina® 20N‐X 6/2017