User Manual Original Language Lavina® 14E May 12, 2020 Table of Contents LAVINA ELITE L14E ............................1 WARRANTY AND RETURNS ............................5 1. GENERAL INFORMATION ............................6 1.1 MANUFACTURER ..............................6 1.2 ENVIRONMENTAL CONDITIONS .......................... 6 1.3 VACUUM CONNECTION ............................6 1.4 MACHINE DESCRIPTION ............................
Page 4
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 6. POPULAR TOOLS ..............................18 7. MAINTENANCE AND INSPECTION .......................... 19 7.1 CLEANING ................................19 7.2 CHECK DAILY ..............................19 7.3 CHECK AND REPLACE EVERY 200 WORKING HOURS ..................19 7.4 ELECTRICAL SYSTEM DIAGRAMS........................
May 12, 2020 WARRANTY AND RETURNS ® WARRANTY POLICY FOR LAVINA ELITE MACHINES A warranty card must be submitted to Superabrasive within 30 days of purchase in order for the foregoing warranty to apply. You can either mail a hard copy of the warranty card or submit it electronically - see page 2.
1. GENERAL INFORMATION This owner’s manual is intended for the operator of the Lavina® ELITE machine, the servicing technician as well as for anyone involved with operating or servicing the machine. We recommend that you read the instructions very carefully and follow them strictly.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 The Lavina® ELITE machine is manufactured and fitted for the above-mentioned applications only! Every other use may possess risks to the persons involved. ® 1.5 LAVINA L14E MAIN COMPONENTS...
The sonorous emissions are within the limits of directives and harmonized standards from the European Union when the Lavina® ELITE is operated with the recommended tools and in normal conditions. However, as previously stated, the operator must wear ear protectors.
2.5 SAFE USE The LAVINA® ELITE is designed to eliminate all risks correlated with its use. However, it is not possible to eliminate the risks of an eventual accident with the machine. Unskilled or uninstructed operator may cause correlated residual risks. Such risks are: Position Risks due to operator’s incorrect working position Tangling up Risks due to wearing inappropriate working clothes...
2.8 OPERATING MACHINE When operating the LAVINA® E, make certain that there is no one, but you around the machine. Never leave the machine unattended while working. The electrical cable must move freely and must be damage-free.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 3. HANDLING AND TRANSPORTATION 3.1 ADJUSTING THE HANDLEBARS To adjust the handlebars, turn the handlebar adjustment handle counterclockwise to loosen the clamp [1]. Position the handlebars in the appropriate position depending on the task [2], and tighten back the clamp by rotating the handle clockwise.
Lavina® 14E May 12, 2020 3.3 TRANSPORT POSITION The Lavina 14E has the ability to be folded and transported by one person. This can be done with or without the head attached. SEPARATING THE HEAD To seperate the head, start by removing the vacuum connection. Pull up and towards the front of the machine [1].Disconnect the electric motor power connection by lifting up the metal locking clip and pulling toward the front of the machine [2].
[3]. With the handlebars positioned as shown, tighten back the clamp by rotating the handle clockwise [4]. 3.4 STORAGE Always store the LAVINA® ELITE machine in a dry place. Never transport the LAVINA® ELITE machine unprotected; it may be damaged if transported unprotected and exposed to rain or snow.
Make sure that the electrical motor is connected to the power box and then connect the power cable to a power outlet. 4.1 VACUUM CONNECTION For connection to a dust extractor, the Lavina 14E comes with 2’’ vacuum hose port connection that can be placed on either side of the machine as shown.
4.3 TOOL MOUNTING The Lavina® 14E uses tool holder A64. With this new holder every one of our tools uses the “Quickchange” connection. To mount tools, begin by unlocking the butterfly with the provided key. Remove the security plate and set it aside. Load the desired tool as shown below, insert the security plate and lock it in place again by rotating the butterfly with the key.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 4.4 OPERATING THE MACHINE Guide the machine in straight lines across the floor, slightly overlapping the previously completed surface with each new line. Work at a constant speed, allowing the tools time to work at a speed appropriate for the tools’ grit size. Avoid vibrations. Do not stop the machine while tools are still running as they will mark the surface of the floor.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 4.5 STOPING THE MACHINE Stopping of the machine must be done gradually until the motor stops. Do not stop moving the machine before the motor comes to rest, as the tools could damage the surface.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 6. POPULAR TOOLS RECOMMENDED TOOLS Note: All of our new tools use the “Quickchange” connection as mentioned above. QuickChange System and Tooling feature extremely fast and convenient tool changes, and a long tool life, providing for great long‐term cost savings.
7.2 CHECK DAILY After operating the Lavina® ELITE machine, the operator should conduct a visual inspection of the machine. Any defect should be taken care of immediately. Pay attention to power cords, plugs and vacuum hoses, loose bolt or screws.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 7.4 ELECTRICAL SYSTEM DIAGRAMS Dust should not enter the control box, as it will destroy the contacts. Remove (blow out) any dust present.
Page 21
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020...
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 8. TROUBLESHOOTING 8.1 REPLACING THE POWER CORD AND PLUGS When replacing the power cord or plugs, always use cords and plugs with specifications as the original ones. Never use lower quality or different type cord and plugs.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 8.3 TOOL HOLDER – DISSASEMBLY, REPLACEMENT OF ELASTIC ELEMENT AND BUFFERS To replace worn out parts such as the elastic element, buffers etc., begin by removing the TOOL HOLDER from the machine (section 8.2).
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 9. DISPOSAL If your machine after time is not usable or needs to be replaced, send the machine back to Superabrasive or a local distributor, where a professional disposal complying with the environment laws and directives is guaranteed.
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 11. SPARE PARTS PARTS AND ASSEMBLY SPECIFICATIONS 11.1 GENERAL PARTS 11.1 LAVINA® 14E GENERAL PARTS Item No. Description Pcs. L14E10.00.00-1 Head L14E20.00.00-1 Carriage L14Е30.00.00 Vacuum hose L21-40.00.00 Pin Assembly...
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 11.3 CARRIAGE...
Page 28
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 11.3 LAVINA® 14E CARRIAGE Item No. Description Pcs. L14Е22.00.00-1 Handlebar Assembly L14E21.00.00-1 Handlebar Pivot L16Е22.00.03 30301250041 Retaining Ring B12DIN471_A2 30301230002 Screw M6x16DIN7991/10.9/ L14Е24.00.00 Left Side Panel 30312000101 Wheel 30301221019 Washer 30301230129 Screw M8x12ISO7380F/10.9/...
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 11.5 CONTROL BOARD ASSEMBLY 11.5 LAVINA® 14E CONTROL BOARD ASSEMBLY Item No. Description Pcs. 30311000717 EMG Button 30311000690 Potentiometer L21X-30.00.05 ON/OFF Button L14Е22.20.01-K Box kit 30301210030 Bolt M5x12DIN6921/8.8/ L16E22.32.00 Protector...
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 11.6 CONTROL BOX 11.6 LAVINA® 14E CONTROL BOX PARTS Item No. Description Pcs. L16E21.11.00 Metal box L16E21.12.01 Metal box plate 30313000099 Invertor 30311000177 Contactor 30311000515 Relay 30311000502 Relay base 30313000151 Counter L16E21.13.00-K...
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 11.7 HEAD 11.7 LAVINA® 14E HEAD Item No. Description Pcs. L14E15.00.00 Electric Motor Assembly L14E14.00.00-K Base Plate Kit 30301230007 Screw M10x35DIN912/8.8/ 30301230289 Screw M6x10DIN912/8.8/ L14E16.30.00 Guard Assembly L14E11.00.00 Guard Holder A64.00.00...
Superabrasive User Manual Original Language Lavina® 14E May 12, 2020 11.8 ELECTRIC MOTOR ASSEMBLY 11.8 LAVINA® 14E ELECTRIC MOTOR ASSEMBLY Item No. Description Pcs. S141 Electric motor L14Е15.10.00 Head Handle 30301240103 Nut M6DIN985 30301210011 Bolt M6x20DIN933/8.8/ L14E15.20.00 Electric Motor Cable...