Chapter 4. Initializing The G8272 - Lenovo RackSwitch G8272 Installation Manual

Chapter 4. Initializing the G8272

© Copyright Lenovo Corp. 2014
When you supply power to the G8272, the switch initializes automatically.
DANGER
Multiple power cords. The product might be equipped with multiple power
cords. To remove all hazardous voltages, disconnect all power cords.
(L003)
2
1
or
!
1
2
The following LEDs indicate the overall system status:
• Power: Steady green if the AC power cord is connected, or flashing green if the
internal power supply unit failed and the switch is powered by a Redundant
Power Supply through a DC to DC power cable.
• Service ( ! ): Off if the system is OK, or flashing if service is required.
2 1
2
1
51