© Copyright Lenovo Corp. 2014
2. Use the M4 screws to attach a mounting bracket to each side of the switch.
Torque the screws to approximately 2.0 newton-meters (Nm) ± 0.1 Nm (17.7
inch-pounds).
3. Slide the switch into the rack.
4. Use M6 screws, washers, and clip nuts (or cage nuts) to secure the switch unit
to the rack. Torque the screws to approximately 5.7 Nm ± 0.1 Nm (50
inch-pounds).
2
5. If installing the 1U air duct option, see the instruction on
6. Connect all external cables.
7. Initialize the switch. See
8. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
6
1
Chapter 4, "Initializing the
49).
Chapter 2: Installing G8272 Hardware and Options
5
3
page
34.
G8272," on
page
51.
"Configuring Vital
29